The PHANTOM 2 VISION remote control is a wireless communication device that uses the 5.8GHz frequency band. It is compliant with CE and FCC (see the FCC ID) regulations and is set to Mode 2 and CE compliance.
©2013-2014 DJI. All Rights Reserved.
1 |
PHANTOM 2
User Manual
V1.2
For PHANTOM 2 Flight Controller Firmware version V3.08
& PHANTOM 2 Assistant version V3.4
& PHANTOM RC Assistant version V1.1
2014.10
Congratulations on purchasing your new DJI product. Please thoroughly read the entire contents of this manual to
fully use and understand the product.
It is advised that you regularly check the PHANTOM 2’s product page at
www.dji.com
which is updated on a
regular basis. This will provide services such as product information, technical updates and manual corrections. Due
to any unforeseen changes or product upgrades, the information contained within this manual is subject to change
without notice.
DJI and PHANTOM 2 are registered trademarks of DJI. Names of product, brand, etc., appearing in this manual are
trademarks or registered trademarks of their respective owner companies. This product and manual are copy
righted by DJI with all rights reserved.
If you have any questions or concerns regarding your product, please contact your dealer or DJI Customer Service.
Assembly and Use
18
©
2014 DJI. All Rights Reserved.
Preparing the Remote Control
5.6 Remote Control Operation
The Remote Control is set to Mode 2 by default.
Stick Neutral/ mid point: Control sticks of the Remote Control are placed at the central position.
Move the Stick: The control stick is pushed away from the central position.
Remote Control
(Mode 2)
Aircraft
(
indicates nose direction)
Operation details
Vertical movements on the left stick control elevation.
Push the stick up to ascend and down to descend.
When both sticks are centered the Phantom will hover in place.
Push the throttle stick upward beyond the centered
(neutral) position to take off. Push the throttle gently to
prevent sudden and unexpected elevation.
Horizontal movements on the left stick control the rudder.
Push left to rotate counter clock-wise and right for
clockwise. If the stick is centered, the Phantom will fly
straight.
The more the stick is moved, the faster the Phantom will
rotate.
Vertical movements on the right stick control forward and
backward pitch.
Push up to fly forward and down to fly backward. The
Phantom will hover in place if the stick is centered.
Push the stick further for a larger pitch angle (maximum
35˚) and faster flight.
Horizontal movements on the right stick control left and
right pitch.
Push left to fly left and right to fly right. The Phantom will
hover in place if the stick is centered.
Push the stick further for a larger pitch angle (maximum
35˚) and faster flight.
Left Dial: Turn the dial to the right, and the camera will
shift to point upwards.Turn the dial to the left, and the
camera will shift to point downwards. The camera will
keep its current position if the dial is static.
Position 1 Position 2 Position 3
The S1 switch is used for compass calibration. Toggle the
S1 from position 1 to position 3 and back approximately 5
times to enter into compass calibration mode.
In Naza-M mode, the S1 switch is used to switch
between control modes and enter compass calibration.
Position 1 Position 2 Position 3
S2 is used to record a Home point manually. After a Home
point has been recorded automatically, flipping S2 from
position 1 to position 3 and back 5 times (or more) rapidly
will move the Home point to the Phantom’s current location.
In addition, you can enable Dynamic Home Point feature
in DJI VISION App.
In Naza-M working mode, S2 is be used for IOC.
For maximum range and reliability, Remote Control antenna should
point skywards with no obstructions between it and the Phantom.
Dji Phantom 2 Vision Plus Manual
Obstacles may cause Return to Home to trigger. Phone Holder and
Range Extender should not block the antenna.
Figure 25
Comments are closed.